Mechanical Basis * |
Peugeot Boxer 2.2 BlueHDI 140/165 |
Emission standard |
Euro 6D - TEMP |
Volume |
2179 ccm |
Maximum power |
103/121 KW |
Weight of vehicle |
2948/2999 Kg (light/heavy) |
Maximum permissible load |
3500 Kg |
Total permissible mass |
6000/6500 Kg (light/heavy) |
Mass of trailer with central axle |
2500/3000 Kg (light/heavy) |
Length |
5,998 m |
Width open mirrors |
2,690 m |
Width without side mirrors |
2,050 m |
Vehicle height - MIN |
2,570 m |
Wheelbase |
4,035 m |
Rear bed dimensions |
1,9 x 1,4 m |
Front bed dimensions |
1,8 x 1,1 - (0,44 x 0,40) m |
The useful width of the cargo space under the rear bed D / W / H |
130 x 98 x 65 cm |
Number of beds |
4 |
Number of seating places |
4 |
Thermal insulation |
Armacell’s elastomeric foam for walls and ceiling (32 mm - 10 mm on the load bearing ribs of the body). Floor: 30 mm high-density expanded polyethylene. |
Windows and roof hatches |
Double acrylic glazing forimproved acoustic and thermal insulation. |
Heating |
Webasto Air Top Evo 40 diesel + underfloor heating foil by EBECO 48V – Power 64W. |
Boiler |
LPG Whale boiler with 8 l capacity |
Fresh Water Tank |
100 L fitted in the vehicle’s interior |
Waste Water Tank |
100 L thermally insulated and heated with warm air |
Battery |
12 V / 90 Ah – TAB C20 AGM Motion |
Fridge |
Thetford T1090 compressor, 90 lt (freezer 6,5 lt.) |
Standard |
Gas detector CBE, awning (Thule) |
Slide-out cupboard/drawers facilitate storage, mid-cabin beds, or make a handy seat.